The outhole kicker, the Spook House drop target reset and the playfield and backbox flashers do not work, in play or in coil test, and the game complains about the Spook House target at power-up.

Outhole, Spook House target reset and flashers all dead: blown fuse on the aux board

Cause: These loads share one supply that is fused on the auxiliary power driver board, separate from the main board fuses, and that fuse (F2) had blown.

Checks

• Check every fuse, including the ones on the auxiliary power driver board, not only those on the main boards and under the playfield.
• When a group of coils and flashers dies together, look for the fuse they share in the schematic.

Fix

• Replace the blown fuse with the rated value. If it blows again, look for a shorted coil or driver on that circuit.

Systems

• Williams System 11B

Games

• Cyclone

Related tips

• Auxiliary power driver board fuses
• Isolating the 50 V flasher circuits for LED flashers
• LED flashers blink when the flipper buttons are pressed
• Whole A or C bank of coils dead
• Whole groups of coils or all flashers dead: A/C select relay stuck
• Circuit dead through the auxiliary power driver board: open zero-ohm jumpers
• Testing coil diodes on the auxiliary power driver board
• C-bank coil or flasher not working

Source: Pinball Repair help group!! (Facebook group)