CPU board connector A1J5 (coin door)
Pin 1 is switch return 7 for the coin door switches. Pins 2 to 7 are strobes 0 to 5: test button, left coin, right coin, centre coin, replay/start and plumb bob/ball roll tilt. Pin 8 is unused, pin 9 is strobe 7 (usually unused) and pin 10 is the slam switch.
Systems
Related tips
- System 80 CPU board connectors and what they carry
- Which CPU connector housings can be reused
- Molex housings and pins for the System 80 CPU connectors
- EDAC solder-lug substitutes for the CPU connectors
- CPU board connectors A1J1 to A1J3 (power and displays)
- Card-edge connectors are System 80's weak point
- Clean corroded card-edge fingers and connectors
- Connector parts usually needed to repin one System 80 game
Source: Repairing & Upgrading Gottlieb System 80 Pinballs from 1980 to 1989, Part Two, Clay Harrell (pinrepair.com)