Banzai Run: interconnect board flash resistors

Banzai Run has its own interconnect board with eight flash resistors: R1 and R2 are 11 ohm, R3 to R8 are 8 ohm. The 8 ohm ones often get hot enough to desolder or break. Check them first when a Banzai Run flasher fails.

Systems

• Williams System 11B

Games

• Banzai Run

Related tips

• The interconnect board (Banzai Run and later)
• GI out on Banzai Run and later: burnt interconnect connector 2J6
• Where the flash lamp resistors are by era
• Interconnect board and flipper power board fuses
• Flash lamp dead on an early System 11 game
• Banzai Run display board traces delaminate
• Lamps under the slingshots out: wire in the wrong position in interconnect plug J12
• Banzai Run and Swords of Fury: lane change is a cabinet microswitch

Source: Repairing Williams System 11 Pinball 1986 to 1990, Part Two, Clay Harrell (pinrepair.com)