SRC packs cannot be tested in circuit
An SRC resistor/capacitor pack must come out of the board to test. In circuit its resistors typically read 0.6 to 2.2k instead of 4.7k, so an in-circuit reading proves nothing.
Systems
Related tips
- Testing the 6821 PIAs in circuit with a meter
- System 11 CPU board won't boot after cleaning: worn ROM socket contacts
- System 11 NVRAM upgrade not working: fit it at U25, not U23 (sound RAM)
- Right sling locks on at power-up and a pop is dead: bad 7402 at U45
- Wrong coils fire and drop target dead: bad PIAs, shorted coil diode and Q14
- Which System 11 CPU boards fit which games
- "Checksum Error" at power-on
- Which System 11 CPU boards swap between generations
Source: Repairing Williams System 11 Pinball 1986 to 1990, Part Three, Clay Harrell