Coil sleeves and flipper rebuild spares
Flipper rebuilds use the 2 3/16 inch nylon coil sleeve 03-7066-5; the 1.75 inch sleeve 03-7066 suits pop bumpers and similar coils, and the lipped inline sleeve 03-7067-5 goes on the knocker. Other flipper spares: plunger and link A-15847 or A-10656, link spacer bushing 02-4676, coil stop A-12390, and 1/4 inch heat-shrink for the pawl. The flipper EOS switch is 03-7811 on non-Fliptronics games and SW1A-193 on Fliptronics games (1992 on).
Systems
Related tips
- Coil sleeve part numbers by use
- Flipper rebuild part numbers for System 11
- Which Williams flipper parts fit Data East flippers
- WPC-style conversion: plunger, springs, bats and coil
- Flipper rebuild steps 8-9: correct coil, new sleeve, reassemble
- Flipper rebuild step 1: remove and check the coil stop
- Flipper rebuild step 6: pawl, plunger, link and bushing
- Flipper coil burns or flipper very weak after a rebuild
Source: Repairing Williams/Bally WPC Pinball Games from 1990 to 1999, Part One, Clay Harrell (pinrepair.com)