Line out on DCS and WPC-95 sound boards

On a pre-WPC-95 DCS board, fit a two-pin .156 inch header at J6 (left pin audio, right pin ground). On WPC-95, fit a two-pin header at J509 (left pin ground, right pin audio). These line outs follow the coin door volume buttons.

Systems

• WPC DCS
• WPC-Security (WPC-S)
• WPC-95

Related tips

• Sound board beep codes, WPC-DCS and WPC-S
• WPC sound board versions
• The WPC sound board runs on its own
• DCS or WPC-95 sound faults: amps and op-amps
• Early WPC-95 games: static or thin, tinny sound
• WPC speakers are all 4 ohm
• WPC-95 audio/visual board part numbers
• WPC-95 audio/visual board LED and beep codes

Source: Repairing Williams/Bally WPC Pinball Games from 1990 to 1999, Part Three, Clay Harrell (pinrepair.com)