After the game was moved, all controlled (insert) lamps stopped working, while the rest of the game played.

Controlled lamps dead after moving the game: loose ribbon cable blew F4

Cause: A ribbon cable had slipped partly off its header in transport, and fuse F4 on the power board had blown.

Checks

• Pull and check each fuse out of its holder, starting with the lamp fuses.
• Check that every ribbon cable and connector is fully seated, especially the one between CPU and driver boards.

Fix

• Reseat all ribbon cables and connectors, then replace the blown fuse with the correct value.

Systems

• Data East/Sega CPU Version 3b

Games

• Mary Shelley's Frankenstein

Related tips

• How the CPU-controlled lamp matrix is wired
• A whole row or column of lamps is stuck on and extra bright
• General illumination dead or dim
• Every CPU-controlled lamp is out
• Lamp column still dead after a new TIP42
• One controlled lamp never lights, bulb is good
• Lamp matrix fault with good transistors: check R55 to R62
• Lamp row still dead after a new TIP122

Source: Pinball Repair help group!! (Facebook group)